Posted on by

Electronic Control System Gas Plus Engines – 019-356   Humidity Sensor

Table of Contents

Remove
Install

Remove

 TOC

Slide the locking tab sideways.

Push down on the button toward the rear of the connector and disconnect it from the sensor.

Remove the sensor from the mixer inlet elbow.

SMALL | MEDIUM | LARGE

Install

 TOC

Make sure the new sensor has an o-ring on the sealing surface where it seals against the mixer inlet elbow.

Lubricate the o-ring.

Install the sensor into the mixer inlet elbow.

Torque Value:  14  n.m  [124 in-lb]

SMALL | MEDIUM | LARGE
   


Push the connectors until they lock

Slide the locking tab to the lock position.

SMALL | MEDIUM | LARGE
Last Modified:  14-Sep-2007
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.