Posted on by

CM870 and ISX Engines – FAULT CODE 2314

Rear Timing Actuator Circuit


Overview

CODE REASON EFFECT
Fault Code: 2314
PID: S84
SPN: 1245
FMI: 11/31
LAMP: Amber
SRT: 

Timing Actuator Number 2 Circuit Error. Error detected on the rear timing actuator circuit.

Cylinders in rear bank will not receive fuel. Engine will run rough with low power.
Rear Timing Actuator Circuit
SMALL | MEDIUM | LARGE

Circuit Description

The timing actuators are commanded by the ECM to control fuel timing. Each timing actuator is connected to the ECM by a timing actuator (+) and timing actuator (-) wire. An electrical signal is sent to the timing actuator from the ECM on the (+) wire and is returned to the ECM on the (-) wire. Each actuator is normally closed, and it is only opened by an electrical pulse from the ECM during metering.

Component Location

The rear timing actuator is located on the fuel control housing. It is the second actuator from the rear of the engine. The fuel control housing is located on the intake side of the engine below the EGR mixer. Refer to Section E for a detailed component location view.

Shop Talk

Possible causes of this fault are:

  • Open circuit in the engine harness, connectors, or actuator
  • Short circuit to ground in the engine harness or actuator
  • Short circuit to voltage source in the engine harness
  • Low or high resistance in the actuator.

Refer to Troubleshooting Fault Code t05-2314

Last Modified:  01-Sep-2010

Published by Jack