CM850 Electronic Control System – 019-400   OEM Pressure Sensor

General Information

TOC

Some original equipment manufacturers (OEMs) can choose to install an additional pressure sensor.

The OEM pressure sensor monitors an OEM-defined pressure and passes that information on to the electronic control module (ECM) through the OEM harness. The ECM uses this information to determine the state of an OEM switched output device.

Refer to the OEM troubleshooting and repair manual for the location of the OEM pressure sensor.

SMALL | MEDIUM | LARGE

Inspect for Reuse

TOC

Inspect the OEM pressure sensor for damaged or broken connector pins.

Refer to the OEM troubleshooting and repair manual for removal and installation instructions.

SMALL | MEDIUM | LARGE
Last Modified:  30-May-2008