October 31, 2022 by Jack

ISC, ISCe, QSC8.3, ISL, ISLe3, ISLe4 and QSL9 Engines – 007-001 Engine Oil Heater

Table of Contents

Preparatory Steps
Remove
Install
Finishing Steps

Preparatory Steps

WARNING

Some state and federal agencies have determined that used engine oil can be carcinogenic and cause reproductive toxicity. Avoid inhalation of vapors, ingestion, and prolonged contact with used engine oil. If not reused, dispose of in accordance with local environmental regulations.

WARNING

To reduce the possibility of personal injury, avoid direct contact of hot oil with your skin.

Drain the lubricating oil. Refer to Procedure 007-037 in Section 7.

SMALL | MEDIUM | LARGE

Remove

Disconnect the oil heater electrical cord.

Remove the heater element.

SMALL | MEDIUM | LARGE

Install

Install the heater element.

Torque Value: 120 n.m [89 ft-lb]

SMALL | MEDIUM | LARGE

Finishing Steps

Connect the oil heater electrical cord.
Fill the engine with lubricating oil. Refer to Procedure 007-037 in Section 7.
Operate the engine and check for leaks.

SMALL | MEDIUM | LARGE

Last Modified: 20-Oct-2009

Feedback / Help

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback. View all posts by Jack

real time web analytics