ISC, ISCe, QSC8.3, ISL, ISLe3, ISLe4 and QSL9 Engines – 007-092   Lubricating Oil Lines

WARNING  To reduce the possibility of personal injury, avoid direct contact of hot oil with your skin.

WARNING  Some state and federal agencies have determined that used engine oil can be carcinogenic and cause reproductive toxicity. Avoid inhalation of vapors, ingestion, and prolonged contact with used engine oil. If not reused, dispose of in accordance with local environmental regulations.

CAUTION  Use caution when draining oil that oil is not spilled or drained into the bilge area. The oil must be disposed in accordance with local environmental regulations.

CAUTION  Before disconnecting the lubricating oil lines, tag the oil lines for correct location to prevent filter and engine damage due to incorrect installation.

Verify and mark the hoses and adapter head for correct location.

1. Oil inlet
2. Oil outlet.

Disconnect the lubricating oil lines from the lubricating oil cooler housing filter adapter.

WARNING  To reduce the possibility of personal injury, avoid direct contact of hot oil with your skin.

WARNING  Some state and federal agencies have determined that used engine oil can be carcinogenic and cause reproductive toxicity. Avoid inhalation of vapors, ingestion, and prolonged contact with used engine oil. If not reused, dispose of in accordance with local environmental regulations.

CAUTION  Use caution when draining oil that oil is not spilled or drained into the bilge area. The oil must be disposed in accordance with local environmental regulations.

CAUTION  Before disconnecting the lubricating oil lines, tag the oil lines for correct location to prevent filter and engine damage due to incorrect installation.

Verify and mark the hoses and oil filter head for correct location.

1. Oil outlet
2. Oil inlet.

Disconnect the lubricating oil lines from the lubricating oil filter head.

Inspect the hoses and o-ring sealing surfaces for damage.

CAUTION  When installing the lubricating oil lines, make sure the oil lines are not touching or rubbing each other or any other engine parts. Damage to the lines can result in a loss of engine lubricating oil pressure.

Install the hoses to the lubricating oil filter adapter head and tighten finger tight.

1. Oil inlet
2. Oil outlet.

Install the hoses on the remote oil filter head and tighten finger tight.

1. Oil outlet
2. Oil inlet.

Verify the correct location of the oil lines on the adapter plate and remote oil filter housing.

Torque the hoses on the adapter plate and the remote oil filter head.

Operate the engine and check for leaks and proper oil pressure.

Shut down the engine and check the oil level; add lubricating oil as necessary.