General Information
|
TOC |
|
Cummins Filtration™ is a subsidiary of Cummins Inc. Cummins Filtration™ filters are developed through joint testing at Cummins Inc. and Cummins Filtration™. Cummins Filtration™ filters are standard on new Cummins® engines. Cummins Inc. recommends their use.
Cummins Filtration™ products meet all Cummins® Source Approval Test standards to provide the quality filtration necessary to achieve the engine’s design life. If other brands are substituted, the purchaser should insist on products that the supplier has tested to meet Cummins Inc. high-quality standards.
Cummins Inc. can not be responsible for problems caused by non-genuine filters that do not meet Cummins Inc. performance or durability requirements.
|
Filter Part Numbers (All Applications Except Marine)
|
|
–
|
Water-separating Filter
|
Fuel Filter
|
Lubricating Oil Filter
|
Inline Air Filter (ISLe4 only)
|
|
Without CM850
|
–
|
–
|
–
|
–
|
|
Cummins® Part Number
|
3944269
|
N/A
|
3401544
|
N/A
|
|
Cummins Filtration™ Part Number
|
FS1022
|
N/A
|
LF9009
|
N/A
|
|
With CM850
|
–
|
–
|
–
|
–
|
|
Cummins® Part Number
|
4070801
|
3959612
|
3401544
|
N/A
|
|
Cummins Filtration™ Part Number
|
FS1003
|
FF5488
|
LF9009
|
AS0247400
|
|
Filter Part Numbers (Marine Applications)
|
|
–
|
Water-separating Filter
|
Fuel Filter
|
Lubricating Oil Filter
|
|
Cummins® Part Number
|
3971757
|
3959612
|
3401544
|
|
Racor® Part Number
|
1000MA
|
–
|
–
|
|
Cummins Filtration™ Part Number
|
–
|
FF5488
|
LF9009
|
NOTE: LF9009 must be used. A venturi type filter must be used in order to benefit from the bypass filtration section of the oil filter. Do not use LF3000. Engine durability will be reduced by the use of the wrong lubricating oil filter.
|
Last Modified: 23-Jun-2010
