Posted on by

CM871 and CM876 Electronic Control Systems, ISX and ISM Engines – 019-066   Engine Oil Pressure Sensor

View Related Topic

Table of Contents

Remove
Test
Install

Remove

 TOC

Disconnect the engine wiring harness from the engine oil pressure sensor.

Remove the engine oil pressure sensor.

SMALL | MEDIUM | LARGE

Test

 TOC

Connect the electronic service tool to the datalink.

SMALL | MEDIUM | LARGE
   


Connect the engine harness to the lubricating oil pressure sensor.

Leave the sensor suspended from the harness.

SMALL | MEDIUM | LARGE
   


Monitor the lubricating oil pressure with the electronic service tool.

The lubricating oil pressure sensor
must be within ±17.2 kPa [2.5 psi] of zero.

If the lubricating oil pressure sensor is
not within specifications, the lubricating oil pressure sensor
must be replaced.

Disconnect the lubricating oil pressure sensor from the engine harness.

Disconnect the electronic service tool.

SMALL | MEDIUM | LARGE
   

Install

 TOC

Verify the o-ring is installed on the sensor.

Install the engine oil pressure sensor.

Torque Value:  23  n.m  [17 ft-lb]

Connect the engine wiring harness to the engine oil pressure sensor. An audible click will be heard when the connector locks in place.

SMALL | MEDIUM | LARGE
Last Modified:  26-Oct-2006
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.