Posted on by

CM2150 Electronic Control System – 019-056   Lubricating Oil Level Sensor

General Information

 TOC

The lubricating oil level sensor is used to monitor the engine lubricating oil level. The sensor is integrated into the dipstick tube on the engine.

  
SMALL | MEDIUM | LARGE

Remove

 TOC

Lift up on the locking tab and pull the electrical connectors apart.

Remove the lubricating oil level sensor from the dipstick tube.

SMALL | MEDIUM | LARGE
   

Clean and Inspect for Reuse

 TOC

Visually inspect the lubricating oil level sensor for damage to wiring or body.

Inspect the o-rings for damage.

SMALL | MEDIUM | LARGE
   

Install

 TOC

Install the sensor into the dipstick tube.

Push the sensor and sensor harness connectors together until they lock.

SMALL | MEDIUM | LARGE
Last Modified:  18-Aug-2006
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.