Posted on by

CM2150 Electronic Control System – 019-395   Turbocharger Compressor Inlet Air Temperature Sensor

General Information

 TOC

The turbocharger compressor inlet air temperature sensor is located on the air inlet of the turbocharger.

  
SMALL | MEDIUM | LARGE

Initial Check

 TOC

Use INSITE™ electronic service tool to monitor the turbocharger compressor air inlet temperature sensor.

  
SMALL | MEDIUM | LARGE
   

Remove

 TOC

Lift up on the locking tab and pull the electrical connectors apart.

SMALL | MEDIUM | LARGE
   


Remove the sensor.

SMALL | MEDIUM | LARGE
   

Install

 TOC

Make sure the new sensor has an o-ring installed.

Lubricate the o-ring with clean engine oil.

Install the new sensor into the engine. Tighten the sensor.

Torque Value:  23  n.m  [17 ft-lb]

SMALL | MEDIUM | LARGE
   


Push the connectors together until they lock.

Start the engine and verify with INSITE™ electronic service tool that the sensor is working properly.

SMALL | MEDIUM | LARGE
Last Modified:  21-Aug-2006
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.