CM2150 Electronic Control System – 019-402   OEM Temperature Sensor

General Information

TOC

Some original equipment manufacturers (OEMs) can choose to install an additional temperature sensor.

The OEM temperature sensor monitors an OEM-defined temperature and passes that information on to the electronic control module (ECM) through the OEM harness. The ECM uses this information to determine the state of an OEM switched output device.

Refer to the OEM troubleshooting and repair manual for the location of the OEM temperature sensor.

SMALL | MEDIUM | LARGE

Inspect for Reuse

TOC

Inspect the OEM temperature sensor for damaged or broken connector pins.

Refer to the OEM troubleshooting and repair manual for removal and installation instructions.

SMALL | MEDIUM | LARGE
Last Modified:  30-May-2008