Posted on by

Cummins N14 STC, Celect, Celect Plus – Service Manual 002-001   Crosshead

Table of Contents

Install

Install

 TOC

Install the valve crossheads in their original location and orientation.

Lubricate the valve stems with clean 15W-40 oil.

SMALL | MEDIUM | LARGE


Use a wire gauge to check the clearance between the crosshead and the valve spring retainer. The clearance must be a minimum of 0.51 mm [0.020 in].

NOTE: The large pocket is toward the exhaust side.

SMALL | MEDIUM | LARGE
Last Modified:  03-Oct-2011
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.