Cummins N14 STC, Celect, Celect Plus – Service Manual 006-012   Fuel Drain Line Restriction

Table of Contents

Measure

Measure

TOC

Inspect the drain lines and make sure the lines do

not
have any loops and are

not crimped.

SMALL | MEDIUM | LARGE


Remove the fuel drain line and install the mercury filled manometer, Part Number ST-1111-3.

SMALL | MEDIUM | LARGE
   


Operate the engine at rated speed and no load.

 
SMALL | MEDIUM | LARGE
   


Observe the reading on the manometer. Hold the manometer at the same level as the connection.

Fuel Drain Line Restriction

mm-hg in-hg
89 NOM 3.5
 
SMALL | MEDIUM | LARGE
   


If the restriction is above the maximum specifications, remove the fuel tank fill cap and check again.

 
SMALL | MEDIUM | LARGE
   


If the restriction is below the specifications when the cap is removed, replace the tank vents.

If the restriction is still above the specifications, inspect the drain lines for restrictions.

 
SMALL | MEDIUM | LARGE
Last Modified:  19-Oct-2011