Posted on by

Cummins N14 STC, Celect, Celect Plus – Service Manual 007-041   Lubricating Oil Viscosity Sensor

Table of Contents

Install

Install

 TOC

Install the bracket to the viscosity sensor. Install the two bracket capscrews and tighten.

Torque Value:  27  n.m  [239 in-lb]

Connect the flexible hoses to the viscosity sensor fittings.

Do not allow dirt or debris to enter the oil lines.

  1. Main oil rifle pressure
  2. Modified pressure signal to pressure regulator
  3. Return to oil pan.

SMALL | MEDIUM | LARGE


Install the entire assembly with flex hoses attached to the cylinder block pan rail.

Install the two capscrews and tighten.

Torque Value:  68  n.m  [50 ft-lb]

SMALL | MEDIUM | LARGE
   


Connect the sensor drain line (1) to the tee fitting on the cylinder block.

SMALL | MEDIUM | LARGE
   


Connect the pressure signal line (1) to the lubricating pump fitting (2) and the rifle pressure supply line (3) to the oil rifle fitting (4).

SMALL | MEDIUM | LARGE
Last Modified:  20-Sep-2011
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.