Posted on by

Cummins N14 STC, Celect, Celect Plus – Service Manual 008-007   Coolant Filter Head

Table of Contents

Remove
Install

Remove

 TOC

The valve is in the “OFF” position when the valve is in the horizontal position.

Close the manual shutoff valve.

Remove the coolant filter.

Refer to Procedure 008-006 in Section 8.

 
SMALL | MEDIUM | LARGE


Remove the coolant filter head insert.

SMALL | MEDIUM | LARGE
   

Install

 TOC

Install the insert into the oil cooler housing.

Tighten the insert.

Torque Value:  47  n.m  [35 ft-lb]

SMALL | MEDIUM | LARGE
   


Install the coolant filter.

Turn the manual shutoff valve to the “ON” position.

The valve is in the “ON” position when the valve is in the vertical position.

Fill the engine with coolant. Refer to Procedure 008-018 in Section 8.

Start the engine and check for leaks.

SMALL | MEDIUM | LARGE
Last Modified:  24-Oct-2011
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.