Posted on by

Cummins N14 STC, Celect, Celect Plus – Service Manual 013-001   Alternator

Table of Contents

Install

Install

 TOC

NOTE: Do

not
tighten the alternator mounting and adjusting link capscrews and nuts until the alternator belt is installed and adjusted.

Install the alternator, capscrew, washer, and nut to the alternator mounting bracket.

Install the adjusting link and mounting capscrews.

SMALL | MEDIUM | LARGE


Install and adjust the alternator belt.

Refer to Procedure 013-005 in Section 13.

SMALL | MEDIUM | LARGE
   


Install and tighten the electrical connections to the alternator.

Install and tighten the electrical connections to the batteries.

SMALL | MEDIUM | LARGE
Last Modified:  12-Sep-2011
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.