Cummins N14 STC, Celect, Celect Plus – Service Manual 013-020   Starting Motor

WARNING  Batteries can emit explosive gases. To reduce the possibility of personal injury, always ventilate the compartment before servicing the batteries. To reduce the possibility of arcing, remove the negative (-) battery cable first and attach the negative (-) battery cable last.

• Disconnect the batteries. Refer to the OEM service manual.

Remove the electrical connections from the starting motor.

Remove the three capscrews, starting motor, and starting motor spacer
(if used).

CAUTION  Make sure to use the same thickness of starting motor spacer (if used) as the one removed to install the starting motor to prevent engine or starting motor damage.

Install the starting motor and the three capscrews.

Tighten the capscrews.

Install and tighten the electrical connections to the starting motor.

WARNING  Batteries can emit explosive gases. To reduce the possibility of personal injury, always ventilate the compartment before servicing the batteries. To reduce the possibility of arcing, remove the negative (-) battery cable first and attach the negative (-) battery cable last.

• Connect the batteries. Refer to the OEM service manual.