Posted on by

Cummins N14 STC, Celect, Celect Plus – Service Manual 016-002   Engine Support Bracket, Front

Table of Contents

Install

Install

 TOC

Install the rubber engine mounts into the crossmember.

Install the engine support bracket and the eight mounting capscrews.

Tighten the capscrews. 

Torque Value:  68  n.m  [50 ft-lb]

SMALL | MEDIUM | LARGE


Lower the front of the engine to the rubber engine mounts.

NOTE: The capscrew holes in the support bracket

must
be aligned with the capscrew holes in the engine mounts.

Install the two support bracket to engine mount capscrews, and tighten to the manufacturer’s specifications.

SMALL | MEDIUM | LARGE
Last Modified:  15-Sep-2011
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.