Posted on by

Cummins N14 STC, Celect, Celect Plus – Service Manual 019-066   Engine Oil Pressure Sensor/Switch

Table of Contents

Install

Install

 TOC

Verify the o-ring is installed on the sensor.

Install the engine oil pressure sensor.

Torque Value:  40  n.m  [30 ft-lb]

Connect the engine wiring harness to the engine oil pressure sensor. An audible click will be heard when the connector locks in place.

SMALL | MEDIUM | LARGE
Last Modified:  22-Dec-2011
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.