Posted on by

Cummins N14 STC, Celect, Celect Plus – Service Manual Lubricating Oil Contaminated

Symptom Tree  t103

This is symptom tree
Cause Correction

Identify lubricating oil contamination

Perform an oil analysis to determine the contaminants.
 

Bulk oil supply is contaminated

Check the bulk oil supply. Drain the oil and replace with non-contaminated oil. Replace the oil filter(s). Refer to Procedure 007-013 and Procedure 007-037 in Section 7.
 

Internal coolant leaks

Refer to the Coolant Loss – Internal troubleshooting symptom tree in Section TS.
 

Lubricating oil sludge is excessive

Refer to the Lubricating Oil Sludge in the Crankcase Excessive troubleshooting symptom tree in Section TS.
 

Fuel in the lubricating oil

Refer to the Lubricating Oil in the Fuel troubleshooting symptom tree in Section TS.
 
Last Modified:  18-Jan-2012
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.