Cummins N14 STC, Celect, Celect Plus – Service Manual 017-007   Pipe Plug

Remove

TOC

Select the appropriate size Allen wrench and remove the pipe plug.

SMALL | MEDIUM | LARGE

Clean and Inspect for Reuse

TOC

Use spray cleaner, Part No. 3823717 or equivalent, to clean the threads of the pipe plugs and threaded bores.

SMALL | MEDIUM | LARGE
   


Inspect the threads of the pipe plugs for mutilation or damage.

Inspect the threaded bores for damage.

Repair the bores, if necessary. Refer to the L10 Alternative Repair Manual, Bulletin No. 3810310.

SMALL | MEDIUM | LARGE
   

Install

TOC

Apply a film of pipe plug sealant, Part No. 3375066 or equivalent, to the threads.

Install and tighten the pipe plugs.

Refer to the following chart for torque values:

SMALL | MEDIUM | LARGE
   


Tighten pipe plugs to the appropriate torque values.

SMALL | MEDIUM | LARGE
Last Modified:  12-May-2003