Tools Required
J 22102 Seal Installer
1. Use the J 22102 to install a new crankshaft front cover oil seal.
2. Install the crankshaft balancer to the crankshaft.
Refer to Crankshaft Balancer Replacement.
3. Install the lower radiator shrouds to the radiator.
Refer to Fan Shroud Replacement (Lower) in Engine Cooling.
4. Remove the safety stands and lower the vehicle.
5. Install the drive belt on the drive pulleys. Refer to Drive Belt Replacement (6.5L Drive Belt).
6. Install the upper fan shroud to the radiator. Refer to Fan Shroud Replacement (Upper) in Engine Cooling.
7. Connect both the battery negative cables to the batteries. Refer to Battery Cable in Engine Electrical.
