Paccar MX-13 – Installing oil filling pipe

1. Clean the gasket face of both the engine block and oil filling pipe (4).

2. Place the gasket onto the oil filling pipe (4) and insert the oil filling pipe attachment bolts (2) to hold the gasket in place.

3. Insert the oil fill pipe (4) with the attachment bolts and gasket and guide it into the original mount position.

4. Make sure that the gasket is aligned correctly, then hand-tighten the oil filling pipe attachment bolts (2).

5. Install the oil filling pipe attachment bolt (1) and tighten all attachment bolts to the specified torque.

6. Depending on the truck model, install the power steering hose attachment bolt (3) and tighten it to the specified torque.

Leave a Reply

Your email address will not be published. Required fields are marked *