1. Remove the cylinder head bolts in the specified sequence.
To remove the cylinder head bolts, use, for instance, special tool (0882233):
1. Fit the bracket (4) to the cylinder head at the flywheel side. Use attachment bolts (5) to secure the bracket (4).
2. Mount the impact socket (1) of special tool (0911724) to the torque multiplier (3), and fit the assembly onto the cylinder head bolt.
3. Place the torque wrench (2) on the torque multiplier (3).
2. Remove the cylinder head.
3. Position the cylinder head on suitable supports.
– Be careful; When removing a cylinder head with the injectors still installed, do not place the cylinder head on a flat surface. Use wood blocks to prevent the cylinder head surface and injector tips from contacting any table or bench surface.
The injector tips extend beyond the plane of the cylinder head and can be easily damaged. Any tip contact can result in micro-cracks that may lead to severe engine damage.
– Avoid damaging the rail, fuel injection pipes.