Table of Contents Engine Dataplate ECM Dataplate Fuel Pump Dataplate Cummins® Engine Nomenclature STC Engine Dataplate TOC The engine dataplate shows important facts about…
Important: • The water pump used with the serpentine belt system rotates counterclockwise (CCW ). Replace the pump only with the proper part number or…
1. Clean the sealing surfaces. 2. Clean the soot deposits from the exhaust manifold. 3. Inspect the manifolds for the following conditions: • Cracks •…
1. Remove the MAP sensor from the intake manifold (if equipped). 2. Remove the IAT sensor from the in take manifold (if equipped). 3. Clean…
1. Clean the parts in solvent, removing all sludge and varnish. 2. Clean the old sealer from the sealing surfaces. 3. Inspect for the following…
1. Clean the parts in solvent, removing all sludge and varnish. 2. Clean the old sealer from the sealing surfaces. 3. Inspect for the following…
Notice: Perform TDC Offset Recovery procedure if the timing chain, timing gears, engine front cover, crankshaft position sensor, crankshaft or other components affecting the timing…
1. Install the driven gear. 2. Install the idler shaft. 3. Install the drive gear with the shaft. Align the marks made during disassembly. 4.…
1. Clean the oil pump components in solvent. Caution: Wear safety glasses in order to avoid eye damage. 2. Dry the components with compressed air.…
1. Remove the oil pump drive shaft retainer. 2. Remove the oil pump drive shaft. 3. Remove the roll pin. 4. Remove the pressure regulator…