1. Install the prechambers. 1.1. Align the locating notch. The prechamber will fit correctly in only one position. 1.2. Using a 32 mm (1.25 in)…
1. Ream the valve guides for oversize valves if the clearance exceeds the specifications. 2. Ream the valve guide bores for the oversize valves as…
Tools Required • J 7872 Magnetic Base Dial Indicator • J 8089 Wire Brush • J 9666 Valve Spring Tester • J 8001 J 26900…
Tools Required J 8062 Valve Spring Compressor This engine uses a 39 mm (1.53 in) stellite faced exhaust valve and an intake valve that is…
1. Clean the parts in solvent. • Wear protective safety glasses and gloves. • Blow-dry the parts with compressed air. 2. Inspect the valve lifter…
Important: Lubricate the valve rocker arms with engine oil before installing. Install valve rocker arms to their original locations. 1. Install the valve rocker arms…
1. Clean the parts in solvent. • Wear protective safety glasses and gloves. • Blow-dry the parts with compressed air. 2. Inspect the valve rocker…
Important: Store all reusable components in an exact order in order to return them to the original locations during assembly. 1. Remove the valve rocker…
Notice: Perform TDC Offset Recovery procedure if the timing chain, timing gears, engine front cover, crankshaft position sensor, crankshaft or other components affecting the timing…
Tools Required J 7872 Magnetic Base Dial Indicator 1. Using a soft cloth and clean solvent, clean the camshaft. Do not scratch the camshaft bearing…