SMALL | MEDIUM | LARGE Engine Family: H/NH, NT This mandrel is designed to install and/or remove the precision bushings in the gear cover accessory drive bore. Last Modified:  30-Jul-2003…

SMALL | MEDIUM | LARGE Engine Family: N14, L10, ISF3.8 This torque wrench is used to torque the Celect injector solenoid captive nuts when installing wiring harness for N14…

SMALL | MEDIUM | LARGE Engine Family: All These torque wrenches are used for general purpose when a specified torque is required.There are available either Micro-Adjust (click-type) torque wrenches…

SMALL | MEDIUM | LARGE Engine Family: This torque wrench is required to accurately and consistently set all PTD top stop injectors. ST 669-13 Screwdriver Attachmentmust be used also.…

SMALL | MEDIUM | LARGE Engine Family: All This ½ inch drive input, ¾ inch drive output, torque multiplier is used for torquing operations where space limitations prevent using…

SMALL | MEDIUM | LARGE Engine Family: B & C Series This tool was developed to eliminate error while timing the pump to the engine. It eliminates the possible…

SMALL | MEDIUM | LARGE Engine Family: B & C Series This kit contains 3824572 Magnetic Tapewith markings to identify TDC and degrees of advance from -5 to 40.…

SMALL | MEDIUM | LARGE Engine Family: B & C Series This kit contains a portable pump (110 VAC, 60 hz) which pressurizes the fuel gallery of the “in…

SMALL | MEDIUM | LARGE Engine Family: B3.9, B4.5 RGT, B4.5s, B6.7s, B5.9, B3.3, A1400, A1700, A2000, A2300 The kits are used to set the injection timing on engines…

SMALL | MEDIUM | LARGE Engine Family: QSV This kit is required to locate top dead center (TDC) or bottom dead center (BDC) on all engines in the QSV…