Conditions Which Generate This Code: The ECM detects the following conditions: • The status of the service brake pedal position switch 1 and the service…

Conditions Which Generate This Code: The ECM detects the following conditions: • The 5 volt supply is less than 4.84 VDC for more than one…

Conditions Which Generate This Code: The ECM detects the following conditions: • The 5 volt supply is greater than 5.16 VDC for more than one…

Conditions Which Generate This Code: This condition indicates that the J1939 data link has a short circuit or an open circuit. All of the following…

Conditions Which Generate This Code: The ECM detects the following condition: • The parameter “Powertrain Data Link” must be programmed to J1939. The ECM also…

Conditions Which Generate This Code: The ECM detects the following conditions: • The engine is cranking. • The theft deterrent is active. System Response: The…

Conditions Which Generate This Code: The theft deterrent feature has been enabled. The correct password must be entered in order to disable the theft deterrent.…

Conditions Which Generate This Code: The ECM detects the following conditions: • Three attempts to complete an Eaton Top 2 shift were unsuccessful. • The…

Conditions Which Generate This Code: The ECM detects the following conditions: • The signal from the primary engine speed/timing sensor has been lost and the…

Conditions Which Generate This Code: The Engine Control Module (ECM) detects the following conditions: • The engine speed exceeded 2600 rpm for more than 0.6…