Posted on by

Cummins N14 STC, Celect, Celect Plus – Service Manual 007-031   Lubricating Oil Pump

Table of Contents

Install

Install

 TOC

Use 15W-40 oil to lubricate the shaft, the gears, and the bushings. Make sure to lubricate the area between the driven gear and the body.

SMALL | MEDIUM | LARGE


Install the driven gear onto the shaft.

Install a new gasket on the pump body and install the cover.

Install the capscrews and tighten.

Torque Value:  27  n.m  [239 in-lb]

SMALL | MEDIUM | LARGE
   


Check the gears for freedom of rotation in the pump.

Install the lubricating oil pressure regulator.

Refer to Procedure 007-029 in Section 7.

SMALL | MEDIUM | LARGE
   


Install the power steering pump mounting flange gasket and cover. Tighten the capscrews.

Torque Value:  27  n.m  [239 in-lb]

Install a new gasket onto the mounting trunion of the lubricating oil pump.

SMALL | MEDIUM | LARGE
   


Install the lubricating oil pump into the mounting hole in the cylinder block gear flange.

Install the five mounting capscrews. Tighten the capscrews.

Torque Value:  54  n.m  [40 ft-lb]

SMALL | MEDIUM | LARGE
   


Install the demand flow cooling signal line. Tighten the signal line fittings.

Torque Value:  9  n.m  [80 in-lb]

SMALL | MEDIUM | LARGE
Last Modified:  11-Nov-2011
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.