Install
|
TOC |
|
Install the aftertreatment injector assembly onto the adapter pipe. Refer to Procedure 011-042 in Section 11.
Install new gaskets on each end of the adapter pipe.
Place the exhaust adapter pipe in position with the pin in the correct location in the turbocharger.
Tighten the v-band clamps on each end.
Torque Value: 11 n.m [97 in-lb]
|
|
|
|
|
|
Last Modified: 28-Jun-2010
Published by Jack
Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.
View all posts by Jack
;){kind=link}
;){kind=link}
