Table of Contents Initial Check Initial Check TOC NOTE: The illustrations shown will be of the SS model single cylinder air compressor. Differences in procedures for…

Table of Contents Preparatory Steps Remove Inspect for Reuse Install Preparatory Steps TOC Steam clean the air compressor and dry with compressed air. Drain the…

Table of Contents Initial Check Remove Clean Inspect for Reuse Install Initial Check TOC  WARNING  Air pressure must be released from system before removing the…

Table of Contents Initial Check Initial Check TOC NOTE: This procedure applies to SS and ST models only.  WARNING  The unloader valve body is installed with…

Table of Contents Remove Install Remove TOC Remove the coolant lines from the air compressor (does not apply to air cooled compressors). SMALL | MEDIUM | LARGE Next Install…

Table of Contents Initial Check Initial Check TOC  WARNING  Wear appropriate eye and face protection when using compressed air. Flying debris and dirt can cause…

Compressed Air System Tool Number ST-302 Ball Joint Vise Use to hold the air compressor for disassembly or assembly. Tool Number ST-647 Standard Puller Use…

Table of Contents Measure Measure TOC Pressure Gauge, Part Number ST-1273 Install pressure gauge, Part Number ST-1273, to the pressure tap in the exhaust head…

Table of Contents Preparatory Steps Remove Clean Inspect for Reuse Install Preparatory Steps TOC Remove the turbocharger. Refer to Procedure 010-033-002.   SMALL | MEDIUM | LARGE Next Remove…

Exhaust System Tool Number ST1273 Pressure Gauge [0 to 75 in Hg] Used to measure the intake manifold pressure and exhaust back pressure. Last Modified:  03-Apr-2002…