Table of Contents Remove Install Remove TOC Disconnect the engine harness connector from the wastegate control valve. Remove the valve by turning it counterclockwise. SMALL | MEDIUM | LARGE…

View Related Topic Table of Contents Initial Check Remove Install Initial Check TOC Check the fuel control valve for a malfunction (sticking). This procedure should…

Table of Contents Remove Install Remove TOC  CAUTION  To reduce the possibility of damaging the harness connector, do not pry or pull on the harness…

View Related Topic Table of Contents Remove Install Remove TOC  WARNING  Wait for the engine to cool down before working on the heated oxygen sensor.…

Table of Contents Remove Install Remove TOC The intake manifold absolute pressure/temperature sensor measures the pressure/temperature of the intake manifold after the throttle plate. Lift…

Table of Contents Remove Install Remove TOC Lift up on the tab and disconnect the connector from the sensor. Remove the sensor by turning it…

Table of Contents Remove Install Remove TOC Lift up on the connector tabs and disconnect the harness connector from the throttle actuator. SMALL | MEDIUM | LARGE Next Remove…

Table of Contents Resistance Check Check for Short Circuit to Ground Check for Short Circuit from Pin to Pin Resistance Check TOC  CAUTION  The leads…

Table of Contents General Information Remove Inspect for Reuse Install Resistance Check Check for Short Circuit to Ground General Information TOC The vehicle speed sensor…

Table of Contents General Information Resistance Check Check for Short Circuit to Ground Check for Short Circuit from Pin to Pin General Information TOC The…