Table of Contents Initial Check Initial Check TOC NOTE: The illustrations shown are of the SS model single-cylinder air compressor. Differences in procedures between the other…

Table of Contents Inspect Inspect TOC Check the index lines (A) in the vibration damper hub (B) and the inertia member (C). If the lines…

Table of Contents Drain Flush Fill Drain TOC  WARNING  Do not remove the pressure cap from a hot engine. Wait until the coolant temperature is…

View Related Topic Table of Contents Remove Clean Inspect for Reuse Resistance Check Install   L10G B5.9G, B5.9LPG, B Gas Plus, B LPG Plus, and…

Table of Contents Maintenance Check Maintenance Check TOC Check the water pump body for indications of water leakage at the weep hole. A chemical streak…

Table of Contents Maintenance Check   Poly-Vee Belt Cogged Belt Maintenance Check TOC Poly-Vee Belt  CAUTION  Make sure that the engine is switched off and…

Table of Contents Maintenance Check Maintenance Check TOC Remove the fan drive belt. Inspect the fan hub for the following: Freedom of rotation Cracks Grease…

Table of Contents Maintenance Check Maintenance Check TOC 3/8 Inch Square Drive, 13 mm Remove the drive belt. Lift the tensioner to remove and install…

Table of Contents Pressure Test Pressure Test TOC Use a 0 to 30 in Hg [0 to 15 psi] pressure gauge to check the catalyst…

Table of Contents Initial Check Remove Clean and Inspect for Reuse Install Initial Check TOC  CAUTION  Spark plug life is largely dependent on cleanliness of…