Table of Contents Initial Check Initial Check TOC Holset® NOTE: This procedure applies to SS and ST models only.  WARNING  The unloader valve body is installed…

Table of Contents Initial Check Initial Check TOC Holset®  WARNING  Compressed air can drive debris into eyes and ears. Keep head well away and wear…

Compressed Air System Tool Number ST-302 Ball Joint Vise Use to hold the air compressor for disassembly or assembly. Tool Number ST-749 or 3823597 Mounting…

Table of Contents Initial Check Initial Check TOC Install a vacuum gauge or water manometer into the exhaust air piping. NOTE: The gauge adapter must be…

Table of Contents Remove Disassemble Clean Inspect for Reuse Assemble Install Remove TOC Remove the turbocharger. Refer to Procedure 010-033-002. SMALL | MEDIUM | LARGE Next Remove two capscrews,…

Table of Contents Leak Test Leak Test TOC Add one unit of fluorescent tracer, Part No. 3376891, to each 38 liters [10.0 U.S. gallons] of…

Table of Contents Measure Measure TOC NOTE: Use a 0.050 mm [0.002 in] blade type feeler gauge to measure the clearance between the compressor wheel and…

Table of Contents Leak Test Leak Test TOC Remove the air intake and CAC piping from the turbocharger. SMALL | MEDIUM | LARGE Next Examine the compressor intake and…

Table of Contents Remove Inspect for Reuse Install Remove TOC Remove the intake and the exhaust pipes from the turbocharger. SMALL | MEDIUM | LARGE Next Inspect for Reuse…

Table of Contents Measure Measure TOC Measure the axial clearance (end to end) using dial depth gauge, Part Number ST-537, or equivalent. Push the rotor…