Table of Contents General Information Remove Inspect for Reuse Install Check for Correct Component General Information TOC A turbocharger bearing housing bracket is available. Using…

Table of Contents Measure Measure TOC Install a vacuum gauge or water manometer in the intake air piping. NOTE: The gauge adapter must be installed at…

Table of Contents Remove Clean and Inspect for Reuse Install Leak Test Temperature Differential Test Pressure Differential Test   Preferred Method Optional Method Remove TOC…

Table of Contents Maintenance Check Maintenance Check TOC  CAUTION  Engine intake air must be filtered to prevent dirt and debris from entering the engine. If…

Table of Contents Remove Inspect for Reuse Install Remove TOC Disconnect the intake air piping from the CAC to the inlet air connector. SMALL | MEDIUM | LARGE Next…

Table of Contents Remove Clean Inspect for Reuse Pressure Test Install Remove TOC  WARNING  Coolant can be toxic. Dispose of in accordance with local environmental…

Air Intake System Tool Number ST-537 Dial Depth Gauge Use to measure turbocharger axial motion. Tool Number 3376891 Fluorescent Tracer Add to oil. Use with…

Table of Contents Remove Inspect for Reuse Install Remove TOC After the seal has been removed, position the wear sleeve removal tool, Part No. 3824452,…

Table of Contents Remove Clean Inspect for Reuse Install Remove TOC Remove the fan drive and the water pump belts. Refer to Procedures 008-002-002 and…

Table of Contents Preparatory Steps Remove Initial Check Disassemble Clean and Inspect for Reuse Measure Assemble Install Finishing Steps Preparatory Steps TOC The air compressor…