Posted on by

N14 Base Engine Troubleshooting and Repair Manual – 010-039   Turbocharger Blade Damage

Table of Contents

Remove
Inspect for Reuse
Install

Remove

 TOC

Remove the intake and the exhaust pipes from the turbocharger.

SMALL | MEDIUM | LARGE

Inspect for Reuse

 TOC

Visually inspect the turbocharger compressor impeller blades for damage.

Rebuild or replace the turbocharger if damage is found. Refer to Procedures

010-033-002 and

010-033-026.

SMALL | MEDIUM | LARGE
   


If the compressor impeller is damaged, inspect the intake air piping and the filter element for damage.

NOTE: Repair any damage before operating the engine.

SMALL | MEDIUM | LARGE
   


Inspect the turbine wheel for damage.

Rebuild or replace the turbocharger if damage is found. Refer to Procedures

010-033-002 and

010-033-026.

SMALL | MEDIUM | LARGE
   

Install

 TOC

Install the intake and exhaust pipes to the turbocharger and tighten the clamps.

Torque Value:  8.5  n.m  [75 in-lb]

Operate the engine and check for air leaks.

SMALL | MEDIUM | LARGE
Last Modified:  12-May-2003
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.