View Related Topic Table of Contents Preparatory Steps Remove Disassemble Leak Test Assemble Install Finishing Steps Preparatory Steps TOC  WARNING  Do not remove the pressure…

Table of Contents Initial Check Initial Check TOC Check the shutters in the closed position to be sure they are completely closed. If the shutters…

Table of Contents Inspect for Reuse Inspect for Reuse TOC  WARNING  Do not remove the pressure cap from a hot engine. Wait until the coolant…

Table of Contents Maintenance Check Maintenance Check TOC Check all hoses for cracks, cuts, or collapsing. NOTE: The silicone engine coolant hose will exhibit swelling due…

Table of Contents Initial Check Initial Check TOC  WARNING  Wear appropriate eye and face protection when using compressed air. Flying debris and dirt can cause…

Table of Contents Remove Inspect for Reuse Install Remove TOC Remove the fan drive belt. Refer to Procedure 008-002 in Section 8. Remove the fan…

Table of Contents Initial Check Initial Check TOC  CAUTION  The fan shroud must be installed correctly, be in good condition, and the shroud-to-fan clearance must…

Table of Contents Initial Check Preparatory Steps Remove Install Finishing Steps Initial Check TOC Remove the fan drive belt. Refer to Procedure 008-002 in Section…

Table of Contents Initial Check Remove Inspect Install Initial Check TOC Remove the fan drive belt. Refer to Procedure 008-002 in Section 8.. Inspect the…

Table of Contents General Information Initial Check Preparatory Steps Remove Install Finishing Steps General Information TOC The fan clutches can be controlled by the electronic…