Table of Contents Remove Clean and Inspect for Reuse Install Remove TOC NOTE: The N14 CELECT™ and CELECT™ Plus engines has one engine coolant thermostat and…

Table of Contents Preparatory Steps Remove Install Finishing Steps Preparatory Steps TOC NOTE: The N14 CELECT™ and CELECT Plus™ engines has one engine coolant thermostat and…

Table of Contents Test Test TOC  WARNING  Do not remove the pressure cap from a hot engine. Wait until the coolant temperature is below 50°C…

Table of Contents Preparatory Steps Remove Inspect for Reuse Install Finishing Steps Preparatory Steps TOC  WARNING  Coolant is toxic. Keep away from children and pets.…

Table of Contents Remove Install Remove TOC The valve is in the “OFF” position when the valve is in the horizontal position. Close the manual…

Table of Contents General Information Remove Install General Information TOC Change the coolant filter at every oil and filter change interval. The correct coolant filter…

Table of Contents Remove Inspect for Reuse Install Remove TOC Remove the fan drive belts. Refer to Procedure 008-002 in Section 8. SMALL | MEDIUM | LARGE Next Loosen…

Table of Contents Remove Inspect for Reuse Install Remove TOC Loosen the capscrews which secure the fan hub shaft to the bracket. NOTE: Both two capscrew…

Table of Contents Cooling System Cooling System TOC Tool Number ST-1138 Belt Tension Gauge Used to check the belt tension on 11/16 to 7/8 inch…

Table of Contents Failure Analysis Inspection Failure Analysis Inspection TOC An analysis of used oil can help diagnose internal engine damage and determine if it…