Table of Contents Remove Remove TOC Remove the demand flow cooling signal line. SMALL | MEDIUM | LARGE Last Modified:  19-Sep-2011 Feedback / Help

Table of Contents Remove Remove TOC Remove the two capscrews from the flange at the oil pan and also the two capscrews from the flange…

Table of Contents Remove Remove TOC Disconnect the sensor from the engine harness. Use engine position sensor tool, Part Number 3822747, to loosen the engine…

Table of Contents Remove Remove TOC Remove the fuel hose. SMALL | MEDIUM | LARGE Last Modified:  19-Sep-2011 Feedback / Help

Table of Contents Remove Remove TOC The timing marks on the accessory drive gear and the camshaft gear must be aligned so that the valve…

Table of Contents Remove Remove TOC NOTE: The illustrations shown will be of the SS model single cylinder air compressor. Differences in procedures for SS, QE,…

Table of Contents Remove   CELECT™ or CELECT™ Plus STC Remove TOC CELECT™ or CELECT™ Plus NOTE: On some fuel pumps the cooling drain line has…

Table of Contents Remove Remove TOC Disconnect all three wiring harnesses from the ECM. Use the following procedure in the CELECT™ Electronic Control System L10,…

Table of Contents Remove Remove TOC Disconnect the engine wiring harness from the engine oil pressure sensor. NOTE: Remove the sensor from the engine. SMALL | MEDIUM | LARGE Last…

Table of Contents Remove Remove TOC Lift up on the tab and disconnect the connector from the sensor. Remove the mounting capscrews and sensor from…