Table of Contents Drive Units Drive Units TOC Tool Number ST-647 Standard Puller Used to remove drive pulleys, impellers, air compressor weights, etc. Tool Number…

Table of Contents Preparatory Steps Remove Install Finishing Steps Preparatory Steps TOC  WARNING  Do not remove the pressure cap from a hot engine. Wait until…

Table of Contents Preparatory Steps Remove Install Finishing Steps Preparatory Steps TOC Disconnect the batteries. Refer to the OEM service manual. Remove the water pump…

Table of Contents Preparatory Steps Remove Disassemble Clean Assemble Install Finishing Steps Preparatory Steps TOC  WARNING  Coolant is toxic.  Keep away from children and pets.…

Table of Contents Remove Clean and Inspect for Reuse Install Remove TOC Shut off the sea water inlet valve.   SMALL | MEDIUM | LARGE Next Remove the screws,…

Table of Contents Clean Clean TOC Back flush the sea water passages of the heat exchanger. SMALL | MEDIUM | LARGE Last Modified:  25-Oct-2011 Feedback / Help

Table of Contents Initial Check Initial Check TOC Check the shutterstats and the thermatic fan annually for cooling system temperature actuated systems. Dual control systems…

Table of Contents Test Inspect for Reuse Test TOC  WARNING  Do not remove the radiator pressure cap until the coolant temperature is below 50°C [120°F].…

Table of Contents Inspect for Reuse Inspect for Reuse TOC Inspect all hoses for cracks, cuts, or collapsing. NOTE: The silicone engine coolant hose will exhibit…

Table of Contents Initial Check Initial Check TOC Inspect the radiator for plugged radiator fins. Use 550 kPa [80 psi] air pressure to blow the…