Important: Check the crankshaft bearing caps for location markings. Mark the caps, if necessary. Return the crankshaft bearing caps to their original locations during assembly.…

Remove the rear oil seal using a small screw driver. Do not reuse the old seal.  

Tools Required J 24270 Ridge Reamer 1. Use the J 24270 in order to remove the ridge or the deposits from the upper end of…

1. Remove the oil pump bolts. 2. Remove the oil pump and drive shaft assembly.

1. Remove the transmission oil cooler line retaining clip retaining nuts. 2. Remove the transmission oil cooler line retaining clip. 3. Remove the oil pan…

1. Remove the camshaft thrust plate retaining bolts. 2. Remove the camshaft thrust plate. 3. Remove the camshaft thrust plates pacer. Important: Pull the camshaft…

Important: When removing the valve lifters, place the lifters in an organizer rack. The lifters must be installed in the same bore from which they…

1. Remove the cylinder head retaining bolts (1-17). 2. Remove the cylinder heads. 3. Remove the gaskets.  

1. Remove the valve rocker arm shaft assembly retaining bolts. Important: Mark the valve rocker arm assemblies, in order to return each assembly to the…

1. Remove the fuel injection fuel feed pipe bracket retaining nuts. 2. Remove the fuel injection fuel feed pipe brackets. 3. Remove the valve rocker…