1. Remove the cylinder head bolts in the specified sequence. To remove the cylinder head bolts, use, for instance, special tool (0882233): 1. Fit the…

1. Place the corresponding piston in the TDC position. 2. Remove the attachment bolt and pull out the oil nozzle. – Only remove the oil…

1. Use the special tool (1903018) to turn the crankshaft counterclockwise as seen from the distribution side. This corresponds to the direction of rotation of…

1. Install the lifting eye (A) onto the cylinder head. 2. Tighten the bolts (1) to the specified torque.  

Check the turbocharger for: – Gas leakage between turbocharger and exhaust manifold. – Bearing clearance (as instructed below). – Inspect the turbine and compressor wheel…

1. Remove the turbo charger attachment bolts (1). Let a second person support the turbo charger while loosening the attachment bolts. 2. Carefully remove the…

1. Use a small flathead screwdriver (A) to release (X) the lock clip (1). 2. Disconnect the connector by pulling (Y) it apart. It might…

1. Loosen the coupling as shown using the special tool (1893778). Only use the tool to disengage the locking mechanism. Pull the coupling to release…