Posted on by

M11 Series – Service Manual – 007-010   Lubricating Oil Dipstick Housing

Remove

 TOC

Remove the four capscrews and the housing.

SMALL | MEDIUM | LARGE

Clean

 TOC

Clean the housing gasket surface.

Clean the cylinder block gasket surface.

SMALL | MEDIUM | LARGE
   

Inspect for Reuse

 TOC

Inspect the dipstick guide tube.

If the guide tube is cracked, missing, or

not
angled downward into the oil pan, replace the dipstick tube housing.

SMALL | MEDIUM | LARGE
   

Install

 TOC

Install a new gasket and the dipstick tube housing.

Install the four capscrews.

Torque Value:  47  n.m  [35 ft-lb]

Check the dipstick calibration.

Refer to Procedure 007-009.

SMALL | MEDIUM | LARGE
Last Modified:  07-May-2003
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.