Posted on by

M11 Series – Service Manual – 013-020   Starting Motor

Table of Contents

Remove
Install

Remove

 TOC

NOTE: The starting motor mounting capscrews can be metric or standard thread sizes. Make sure to install the same-size capscrews that were removed.

Remove the electrical connections from the batteries.

SMALL | MEDIUM | LARGE


Tag and remove the electrical connections from the starting motor.

SMALL | MEDIUM | LARGE
   


Remove the three capscrews and the starting motor.

SMALL | MEDIUM | LARGE
   

Install

 TOC

Before installing the starting motor, make sure the capscrews are the correct size and grade.

Install the starting motor and the three mounting capscrews.

Tighten the capscrews.

Torque Value:  90  n.m  [140 ft-lb]

SMALL | MEDIUM | LARGE
   


Install and tighten the electrical connections to the starting motor.

SMALL | MEDIUM | LARGE
   


Install and tighten the battery electrical connections.

SMALL | MEDIUM | LARGE
Last Modified:  07-May-2003
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.