N14 Base Engine Troubleshooting and Repair Manual – 007-009   Lubricating Oil Dipstick

Install the dipstick into the dipstick tube housing.

NOTE: Do

not
overtighten the dipstick.

Use clean 15W-40 oil to fill the oil pan to the specified “LOW” oil level.

The “LOW” level oil pan capacity is 30 liters [8.0 gal].

Remove the dipstick, and scribe a mark across the dipstick at the indicated “LOW” oil level. Mark the “LOW” oil level with an “L”.

NOTE: The dipstick will break if the scribe mark is too deep.

NOTE: If a new blank dipstick is being used, cut off the dipstick approximately 38 mm [1.5 inch] below the “LOW” oil level mark.

Install the dipstick into the dipstick tube housing.

NOTE: Do

not
overtighten the dipstick.

Fill the oil pan to the specified “HIGH” oil level.

The “HIGH” level oil pan capacity is 36 liters [9.5 gal].

Remove the dipstick, and scribe a mark across the dipstick at the indicated “HIGH” oil level. Mark the “HIGH” oil level with an “H”.

NOTE: The dipstick will break if the scribe mark is too deep.