Symptom Tree
|
Engine is operating at low ambient temperature |
Check the shutters and engine compartment air. Refer to Procedure 101-015 (Operating the Engine) in Section 1. |
 |
|
Electronic fault codes are active |
For instructions on how to read active fault codes, refer to Procedure 101-007 (Electronic Controlled Fuel System) in Section1. If fault codes are active, contact a Cummins Authorized Repair Facility. |
|
|
Engine mounts are worn, damaged, or not correct |
Check the engine mounts. Refer to the OEM service manual. |
|
|
Air in the fuel system |
Check for air in the fuel system. Tighten or replace the fuel connections, fuel lines, fuel tank standpipe, and fuel filters as necessary. |
|
|
Fuel grade is not correct for the application or the fuel quality is poor |
Operate the engine from a tank of high-quality fuel. Refer to Procedure 018-002 (Fuel Recommendations and Specifications) in Section V. |
|
|
Overhead adjustments are not correct |
Measure and adjust the overhead settings. Refer to Procedure 003-004 (Overhead Set) in Section 5. |
|
| Contact a Cummins Authorized Repair Facility |
