Posted on by

Centinel System – Repair Manual – 007-028   Lubricating Oil Pressure Gauge

Table of Contents

Test

Test

 TOC

  1. Check for the following:
    • Electrical wiring broken
    • Oil pressure sensor malfunction (refer to step No. 2)
    • Plumbing loose, leaking, or broken.
  2. Use a master gauge of known accuracy to verify the reading of the suspect sensor or gauge.
  3. Replace the oil pressure sensor or gauge if it is defective.

NOTE: The arrow points to a combination oil pressure and oil temperature sensor on the cylinder block below the integrated fuel system module.

SMALL | MEDIUM | LARGE
Last Modified:  13-Mar-2002
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.