Posted on by

Centinel System – Repair Manual – 008-036   Fan Hub, Belt Driven

Install

 TOC

Automotive with CM870


 WARNING 

This assembly weighs 23 kg [50 lb] or more. To reduce the possibility of personal injury, use a hoist or get assistance to lift this assembly.

Install the fan hub assembly and the capscrews.

Tighten the capscrews.

Torque Value:  113  n.m  [83 ft-lb]

SMALL | MEDIUM | LARGE

Automotive with CM570


 WARNING 

This assembly weighs 23 kg [50 lb] or more. To avoid personal injury, use a hoist or get assistance to lift this assembly.

Install the fan hub and the capscrews.

Tighten the capscrews.

Torque Value:  90  n.m  [66 ft-lb]

Install the belt tensioner bracket.

SMALL | MEDIUM | LARGE
   

Industrial CM570 and Power Generation without CM570


The fan hub must be installed in the correct location on the fan support to allow proper clearance between the fan and fan shroud. Refer to the OEM service manual.

SMALL | MEDIUM | LARGE
   


Make certain the correct fan center is used for the application.

Install the fan hub on the fan support using four capscrews and washers.

Tighten the capscrews.

Torque Value:  90  n.m  [66 ft-lb]

SMALL | MEDIUM | LARGE
Last Modified:  13-Jun-2005
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.