Posted on by

Centinel System – Repair Manual – 008-088   Fan Support

Install

 TOC

Industrial and Power Generation


Install two guide studs into the upper gear cover.

SMALL | MEDIUM | LARGE


Use clean 15W40 oil to lubricate the capscrew threads.

Install six capscrews.

Remove the two guide studs and install the remaining two capscrews.

Tighten the eight capscrews in the sequence shown.

Torque Value:  56  n.m  [41 ft-lb]

SMALL | MEDIUM | LARGE
   


Install the belt tensioner support bracket to the engine and fan support.

Tighten all eight capscrews finger tight.

SMALL | MEDIUM | LARGE
   


Tighten capscrew numbers 1 and 2 finger tight to mate the surfaces of the belt tensioner support bracket to the fan support.

  
SMALL | MEDIUM | LARGE
   


Tighten capscrew numbers 3, 4, 5, and 6.

Torque Value:  90  n.m  [66 ft-lb]

SMALL | MEDIUM | LARGE
   


Tighten capscrew numbers 1, 2, 7, and 8.

Torque Value:  56  n.m  [41 ft-lb]

SMALL | MEDIUM | LARGE
Last Modified:  18-Apr-2005
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.