Posted on by

Centinel System – Repair Manual – 020-017   Engine Brake Control Valve

Table of Contents

Remove
Inspect for Reuse
Install

Remove

 TOC

Remove the rocker lever cover. Refer to Procedure 003-011.

SMALL | MEDIUM | LARGE


 WARNING 

The control valve is spring-loaded. To avoid personal injury, apply thumb pressure to the control valve cover, slowly remove cover until spring pressure ceases, and then remove the valve.

Use snap ring pliers to remove the snap ring and control valve from rocker lever assembly.

SMALL | MEDIUM | LARGE
   

Inspect for Reuse

 TOC

Inspect the brake lever for wear in the control valve counterbore area.

Replace the brake lever if the counterbore wear extends beyond the snap ring groove diameter.

SMALL | MEDIUM | LARGE
   


Inspect the control valve spring for breakage and free length.

Spring Free Length
mm in
44.45 NOM 1.75

Replace the control valve spring if the free length is less than the specification.

SMALL | MEDIUM | LARGE
   

Install

 TOC

Move the control valve in the bore to insure free movement.

Lubricate the control valve assembly.

Install the control valve into rocker lever assembly and snap ring.

SMALL | MEDIUM | LARGE
   


Install the rocker lever cover. Refer to Procedure 003-011.

SMALL | MEDIUM | LARGE
Last Modified:  26-Jun-2002
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.