Posted on by

ISM, ISMe, and QSM11 – 003-019   Crankcase Breather Element

Table of Contents

Remove
Install

Remove

 TOC

Loosen the eight cover mounting captive capscrews.

Remove the element cover.

NOTE: Discard the crankcase breather element in accordance with local environmental regulations.

Remove and discard the crankcase breather element.

Wipe out any excess dirt or oil from the inside of the cover.

SMALL | MEDIUM | LARGE

Install

 TOC

Install the new crankcase breather element in the breather housing.

Make sure the element is properly seated in the housing so its seal will not be cut, crimped, or otherwise compromised when installing the housing cover.

Install the cover.

Tighten the eight captive mounting capscrews.

Torque Value:  5.2  n.m  [46 in-lb]

SMALL | MEDIUM | LARGE
Last Modified:  23-Jun-2010
Avatar photo

Published by Jack

Hello, I'm Jack, a diesel engine fan and a blogger. I write about how to fix and improve diesel engines, from cars to trucks to generators. I also review the newest models and innovations in the diesel market. If you are interested in learning more about diesel engines, check out my blog and leave your feedback.